G5 Full hydraulic top hammer drilling rig
G5 Full hydraulic top hammer drilling rig
Applicable pore size range: 45-90mm GIA G5 Full hydraulic top hammer, equipped with national engine, imported brand variable pump system, Anbatuo high power drill, high perforating efficiency, ultra-low energy consumption, complex terrain strong off-road ability. The folding arm structure ensures a wider range of drilling holes and strong adaptability to complex terrain. The product is widely used in open pit mines and municipal engineering earthwork excavation, quarry material collection, etc Drilling operation.
Propulsion beam system
The aluminum alloy beam driven by oil cylinder and steel wire rope has a higher strength and more superior bending resistance, which can achieve the ideal drilling straight. Drilling goes on more smoothly. The propulsion beam is equipped with a mechanized rod changing system, and the operator can complete the receiving and unloading rod action in the cab
Arm drill system
With the rectangular section folding large arm structure, the vertical and horizontal holes can be drilled in the facade, and the drilling coverage area in the plane can reach 13m²
hydraulic drill
The high-power rock drill designed by Antop Group is equipped with high perforation efficiency, high and low impact and automatic card function, and stronger adaptability to different rock conditions.
navar Proprogrammable
logic controller system has high reliability, simple installation, easy maintenance, powerful function expansion space, and easy fault diagnosis
Two levels of dust collection system
The two-stage dry dust collection system can be self-cleaned online, with good dust collection effect and meet the national dust emission requirements
pilothouse Configure
with high-power air-conditioning refrigeration system and warm air system
|
Drilling range |
|
|
Drilling diameter |
90~140mm |
|
Drilling depth |
25m |
|
Drill rod specification |
T38/T45 |
|
Drilling rod capacity |
6+1 |
|
Engine |
|
|
Brand |
Yu Chai China Standard III |
|
Item no |
YCA-7240-T300 |
|
Power |
134KW |
|
Air compressor |
|
|
Air capacity |
6m3/min |
|
Max working pressure |
8bar |
|
Compression type |
Two stage screw compression |
|
Slewing head |
|
|
Slewing speed |
0~120rpm |
|
Slewing torque |
2000Nm |
|
Propeller |
|
|
Propulsion stroke |
3500mm |
|
Compensation length |
6030mm |
|
Propulsion mode |
Oil cylinder+wire rope |
|
Propulsion beam material |
Aviation aluminium |
|
Maximum propulsion |
20kN |
|
Maximum drawing force |
30kN |
|
Traveling system |
|
|
Electrical voltage |
2*12V.120AH |
|
Traveling speed |
1.5~3.1km/h |
|
Climbing ability |
20° |
|
Chassis swing angle |
±10° |
|
Drilling arm |
|
|
Drilling lifting range |
down 28°/up 45° |
|
Left and right swing angle of drilling arm |
Left 25°/right 25° |
|
Left and right swing angle of bracket |
Left 10°/right 91° |
|
Propeller pitching range |
130° |
|
Size & Weight |
|
|
Weight |
13500kg |
|
Size |
10800X2350X3000mm |
